Wall Lamp Mitch

Item no

Antique brass finish | black finish shades

cm inch
57 x H. 150 x D. 57 cm
22.44" x 59.06" H x 22.44" D
See full dimensions
Provided with an antique brass finish, Wall Lamp Mitch captures the aesthetic of designer lamps from the 1950s and 60s.Read more
  • Handcrafted by skilled artisans
  • Worldwide Shipment
  • Personal advice in our Showroom
More Information
Lamp holderE27
Lamp holder qty2
Max wattage40 watt
Max voltage230 Volt
Shade dimensions20,5 x 19,5 x H. 22 cm
Indoor/outdoorIndoor use/dry locations only

Please note that the reference dimensions are indicated as follows:

All dimensions mentioned in the descriptions are approximate and subject to change (with a tolerance of 2 percent).

cm inch
  • a 57
  • c 150
  • d 57
  • a 22,44
  • c 59,06
  • d 22,44
Provided with an antique brass finish, Wall Lamp Mitch captures the aesthetic of designer lamps from the 1950s and 60s. Its distinguishing curved lampshades are finished in black and beautified with a white inner. For ultimate flexibility, the arms can be turned to the left and the right, and the shades can be rotated in every desired direction to spread light where you want it. Combine with our A shape LED bulbs for a bold yet warm lighting effect.

Care instructions


To maintain the beauty of your luxury lighting, we recommend the following simple guidelines. When cleaning a lamp, make sure you unplug the power cord first. Always make sure sprays or liquids can not get in the lamp fittings.

Lighting detailLighting detail

Cleaning & Maintenance

For general maintenance, periodically dust off your lighting with a feather duster or a soft clean cloth, preferably weekly.

Metallic finishes

Use lukewarm water with a mild household detergent to clean metal finishes. Gently wipe the metallic surfaces, rods and parts with a soft, dampened cloth or chamois. Dry well with a clean, soft cloth. Never use cleaners with ammonia, bleach or hard chemicals and avoid paper towels or scouring pads.


Never use abrasive materials for cleaning glass as they may cause scratches. Use appropriate glass cleaning solutions and a microfiber cloth. If you are using a chemical cleaner, take care not to spill it on any of the surrounding metallic finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added shine and sparkle.


Avoid commercial household cleaners because the chemicals in these products can dull and craze the acrylic. The best way to care for acrylic surfaces, rods and parts, is to clean with lukewarm water and a bit of liquid soap. Rinse with clear water and dry well. Always use soft cloths for cleaning as not to scratch the acrylic.

Lighting detailLighting detail
The article has been added to your cart.