Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Brass finish | clear glass | swing arm
Including pleated cream shade
- Handcrafted by skilled artisans
- Worldwide Shipment
- Personal advice in our Showroom
Visit eichholtz.com/usa for:
- direct access to the US Quick Shipping Program
- UL certified lighting
Visit Eichholtz.comand select your language
|Lamp holder qty||1|
|Light bulbs included||Not included|
|Max voltage||220 - 240 Volt|
|Plug type||F - Schuko plug|
|Fabric composition shade||80% polyester | 20% cotton|
|Shade dimensions||ø 59 x ø 38 x H. 35 cm|
|Indoor/outdoor||Indoor use/dry locations only|
Please note that the reference dimensions are indicated as follows:
All dimensions mentioned in the descriptions are approximate and subject to change (with a tolerance of 2 percent).
- W. 23 | max W. 58 | H. 200 cm
- W. 9.06″ | max W. 22.83″ | H. 78.74″
HOW TO CARE FOR LIGHTING WITH A METALLIC FINISH AND GLASS OR ACRYLIC
To maintain the beauty of your luxury lighting, we recommend the following simple guidelines. When cleaning a lamp, make sure you unplug the power cord first. Always make sure sprays or liquids can not get in the lamp fittings.
For general maintenance, periodically dust off your lighting with a feather duster or a soft clean cloth, preferably weekly.
Use lukewarm water with a mild household detergent to clean metal finishes. Gently wipe the metallic surfaces, rods and parts with a soft, dampened cloth or chamois. Dry well with a clean, soft cloth. Never use cleaners with ammonia, bleach or hard chemicals and avoid paper towels or scouring pads.
Never use abrasive materials for cleaning glass as they may cause scratches. Use appropriate glass cleaning solutions and a microfiber cloth. If you are using a chemical cleaner, take care not to spill it on any of the surrounding metallic finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added shine and sparkle.
Avoid commercial household cleaners because the chemicals in these products can dull and craze the acrylic. The best way to care for acrylic surfaces, rods and parts, is to clean with lukewarm water and a bit of liquid soap. Rinse with clear water and dry well. Always use soft cloths for cleaning as not to scratch the acrylic.